Using inexpensive RC and relay to control 12v motor

Demonstration of using the controller and receiver board from a inexpensive RC car to power a relay that controls 12 volt power to a windshield wiper motor

firing angle control of TRIAC using ATmega16 microcontroller (BIT MESRA)

software used for circuit simulation: proteus 7.6 software used for video recording: camtasia studio 7.1 component used: triac (BT136) , optocoupler (moc3021) , ATmega16 microcontroller,lamp load, resistor 150ohm,power source 50V 50hz ac supply ,spdt switch (single pole double throw ) guys this is my first video on youtube plz tell me how this video is ?? and do comment on this video.. if any one want code for microcontroller plz mail me .. vikrant1433.09@bitmesra.ac.in

Arduino Brushless DC Speed AND Direction Control Setup (Part 1)

Speed and direction control of an 8A Brushless DC motor ($7) using an 18A ESC ($8) and a 10A Double Pole Double Throw [DPDT] relay ($10). Speed control is achieved by varying the duty cycle of a 50Hz digital pulse from the Arduino to the ESC signal wire. Direction control is achieved by wiring the ESC==Relay==Motor so that when the relay switches, it reverses two of the three phases to the motor.

Arduino Brushless DC Speed AND Direction Control Setup (Part 2)

Speed and direction control of an 8A Brushless DC motor ($7) using an 18A ESC ($8) and a 10A Double Pole Double Throw [DPDT] relay ($10). Speed control is achieved by varying the duty cycle of a 50Hz digital pulse from the Arduino to the ESC signal wire. Direction control is achieved by wiring the ESC==Relay==Motor so that when the relay switches, it reverses two of the three phases to the motor.

PECO TRF115 Industrial Control

This PECO TRF115 Industrial control single pole, double throw can control temperature from 0-120°F, with a voltage rating up to 480V and is UL approved

Great Price GAMA Electronics for RF Remote Single Pole, Double Throw Control

Cheap "RF Remote Single Pole, Double Throw Control" Discount review update price today