Tuesday, February 28, 2012

Arduino Brushless DC Speed AND Direction Control Setup (Part 2)

Speed and direction control of an 8A Brushless DC motor ($7) using an 18A ESC ($8) and a 10A Double Pole Double Throw [DPDT] relay ($10). Speed control is achieved by varying the duty cycle of a 50Hz digital pulse from the Arduino to the ESC signal wire. Direction control is achieved by wiring the ESC==Relay==Motor so that when the relay switches, it reverses two of the three phases to the motor.

Sunday, February 26, 2012

Landing Gear Motor w/ Momentary Switch

New (drill) motor attached to 9.6 Volt rechargeable battery and momentary dpdt (double pole double throw) switch.

Friday, February 24, 2012

Leon's Magnet Pump.mov

The Magnet Pump has a DPDT Reed switch with the battery leads shorted in the switch, and the battery in series with the coil on one side and the output capacitor wired in series through the other.