DIY True Bypass Looper Guitar Footswitch 1Channel 9v

NOTE: !!! 3/14/2012 The beavis audio link below is broken so the new link is www.diyguitarist.com schematics www.beavisaudio.com It's the schematic that says True Bypass Loop with LED Indicator BTW if you decide to make the it without led you can buy the DPDT switch at Radio Shack. Parts. Radio Shack Case 270-1802 $2.99 (You can use whatever case you want) LED Light (2 in a pack) $2.49 2.1MM Power Jack $2.99 (M size (9V) 2.2K Ohm 1/4-Watt Carbon Film Resistor (5 Pack) 271-1325 $.99 1/4 Mono Jack 274-252 (2 in a pack) $3.09 (need to buy 2 of these) 3pdt button... EBAY or look online Actually everything is available on www.pedalpartsplus.com note: Do not use the 9.V jack from Radio Shack or similar metal ones if you are using a metal case unless you are going to have some sort of rubber insulator around it. Remember the 9V is center negative for this build.

Bourns Push-Pull Switch Guitar Application

PDB183-GTR Guitar Potentiometer with a push-pull switch in an electric guitar for split-coil switching

Homemade Guitar A/B Switch for $15

I made a A/B switch with simple parts for very cheap. I bought a 5" x 3" x 2" project box, 3 audio mono jacks, and a DPDT Switch...